No need to install drivers, no need to set up plug and play, compatible with any system. Convenient to carry, can be on the same screen at any time, wireless network makes it suitable for more scenarios, making on-screen sharing easier
Specifications
Name: HDMI wireless transmitter&receiver
Resolution: 1080P60Hz
Transmitter interface: HDMI, USB power supply
Receiver interface: HDMI, USB power supply
Function: point-to-point wireless transmission
Wireless frequency: 5.8G
Interface: nickel plated
Shell: ABS
Cable length: about 60CM
Wire diameter: about 3.5MM
Delay: about 100ms
Packing: carton
Package
1*Transmitter
1*Receiver
1*Manual
HDMI Wireless Transmitter&Receiver
30 Meters
Note:That the A88 mobile screen projector requires the phone to support DP protocol, and laptops with Type-C interfaces are compatible
CS5:
Main Features:
1. Transfer HDMI video and audio signals over long distances via WiFi, the longest distance can be up to 50 meters in open space.
2. Compatible with HDMI 1.4, 1.3 standards;
3. The HDMI wireless transmitter and receiver has the ability to automatically detect and configure different display modes
4. Built-in automatic equalization system to keep contents smooth, clear and stable;
5. Both the receiver/transmitter are with HDMI interface, no software, no setup, no driver required, just plug and play;
Specification:
Brand:VIKEFON
Connectivity technology: HDMI
Connector Type: HDMI
Special feature: Miracast
Resolution: 1920 x 1080 @ 60 Hz
Supported Internet: Skype, Hulu, Nettflix, Amazon Instant Video, YouTube
Compatible devices: Laptop
Longest transmission distance: 50M
Stable transmission distance: 30M
Repairing Instructions:
Both the wireless HDMI transmitter and the receiver were well paired before leaving the factory. If pairing fails, please repair it as follows:
1. Please press and hold the function button of the receiver with the included snap pin for more than 3 seconds, the interface will appear "Release the button to pair with EZCast TX", then wait for the transmitter to enter pairing mode.
2. Press and hold the function button of the transmitter with the included snap pin for more than 5 seconds, the indicator light flashes for pairing, wait for the transmitter indicator light to always light up, indicating that the pairing is successful.
What you get:
1 x HDMI wireless transmitter
1 x HDMI wireless receiver
Connection step 1
Connect the wireless display receiver to your screen and power it on(5V/2A).
Connection step 2
Plug the transmitter to laptop,connect it to the power supply and wait for mirroring automatically.
Reviews
There are no reviews yet.